How Fishing Hooks Are Made


how fishing hooks are made

Fish an important food resource. Fishing gear is as impressive as the fishing sport itself. The hook is one of the most crucial things an angler needs to get just right. If you have found yourself asking how fishing hooks are made, you have come to the right place. This article will highlight how fishing hooks are made.

Parts Of A Fishing Hook 

How Fishing Hooks Are Made
Source: Wikipedia.org

A fishing hook is a lot more complicated than just a piece of wire. It comprises of many sub-parts. These parts would be different for every other type of fishing hook. Here is how these parts are distinguished:

Eye It is a ring structure, which is the link between the line and the hook.

  • Shank

The section of the hook running down from the eye to the bend.

  • Bend 

It is where the hook bends on itself. 

  • Barb

It is a spike that is facing backward. This prevents the hook from coming loose.

  • Point 

It is the sharp part of the hook which pierces the fish’s mouth. 

  • Throat

The section of the hook running down from the point till the bend.

  • Gap/Gape 

It is the distance between the shank and throat. 

Diversity In Fishing Hooks 

FishingOpens in a new tab. hooks come in many types. We have discussed the essential components of a fishing hook. However, these parts can have different shapes and sizes, which would allow the hook to have specific characteristics.

Hook Point 

Hook point has to keep the fish attached to the hook. Picking the right hook depends heavily on the point. Here are some popular hook point designs: 

1)-Needle Point 

This point is practical as it makes a clean piercing in the fish’s mouth, causing minimal harm. This makes it harder for the fish to get loose from the hook as well. It is bent slightly towards the shank.

2)-Spear Point 

 This is a very popular hook because it is easy to use than other hooks. It can be sharpened easily as compared to other hooks. It makes a decent piercing without causing much harm to the fish.

3)-Hollow Point 

This hook is suited more too soft-mouthed fish. The hooks have a spike that is bent in and which curves down to the barb. This hook might be ineffective against tougher fish.

4)-Knife Edge Point 

This point is not one to mess around. The sharpened point on both sides would cause maximum damage to the fish while penetrating. The direction of the point is away from the shank.

5)-Rolled In point 

Towards the eye, the tip is pointed for maximum damage. It can pierce deeply without requiring much force. 

Types Of Hook Eye 

There are many different types of hook eyes which are useful for various functions. Choosing the right hook eye might give you the advantage on your next fishing trip. Certain eyes are made for specific knots and tying styles.  

1)-Ringed eye 

This type of eye is the most commonly used. It easy to use as treading a line through it is not very difficult. This can also work with a variety of knots, making it suitable for the average angler.

2)-Needle Eye

This type of eye is ideal for anglers fishing with bait. This type of eye allows the entire hook to be threaded through the bait quickly.

3)-Brazed eye 

This type of eye is exceptionally effective against fish, which are larger and more robust. This eye is a metal loop that closes shut. This makes it strong and resistant to bending and breaking.

Barbed And Barbless Hooks

Barbs help by holding the bait on the hook more effectively. Some hooks have multiple barbs on them for this very purpose. The barb can make it harder for a fish to get loose from the hook. Barbs allow you to lure fish easily and increase your chances of catching them.

However, the disadvantage of using barbs is that it causes much more harm to the fish than a barbless hook.

Popular Fishing Hooks 

There are unfathomable types of fishing hooks present, each of them suited to a particular scenario. However, there are a few types which an angler should have at all times in their tackle-box.

1. Treble Hook 

A treble hook is an incredibly useful hook. As it has 3 points, this increases the chances of getting a hookup. It is an efficient and robust hook. However, it does not pierce very deeply. This design also makes it harder to pull out from the fish as you might hurt yourself with one of the points.  

2. Bait Holder Hooks

As the name already suggests, this hook is ideal for fishing with bait. These possess barbs on the shank for the bait and the point, so the fish doesn’t get loose. These, however, cause a lot of damage to the fish.

3. Jig Hooks 

These hooks are easy to use and also are surprisingly effective. The design maximizes the movement of the lure. The eye is at a right angle from the shank. This hook has a design that is best suited for catch and release, and this would not cause much harm to the fish.

4. Circle Hooks 

Circle hooks cause the least amount of harm to the fish. This point is bent towards the shank, and this innovative design allows the hook not to penetrate their throat but the corner of the fish’s mouth.

How Are Fishing Hooks Manufactured

Fishing hooks have been made for a very long time. As of today, many things have changed in the process. The process starts with raw materials.

Raw Materials 

The primary raw material used in making hooks is steel wires. The most commonly used wires are Stainless Steel, High Carbon Steel, and Vanadium. The latter is an incredibly strong material. In engines of sports cars, this material is used as well.

Making A Fishing Hook 

Most of the manufacturing work is done in the machines. Firstly, the machine cuts the wire according to the type of the hook, which has been programmed to be made. After that, the machine adds the eye to the hook. Then the machine forges the end of the hook to flatten it. This flattened end is then cut into the point of the hook. 

Then a coarse grind is performed to sharpen the point. Then the machine adds a barb to the hook, and this step could vary from hook to hook as some hooks do not have barbs.

Then a razor-sharp finished is performed on the point, and finally, the hook is bent, which gives the hook its shape. That is how fishing hooks are made in the 21st century. 

Future Of Fishing Hooks

As there are hundreds of different designs of fishing hooks, and more specialized hooks are developed every day. Most of the machines that are building hooks are custom designed and programmed.

So whenever a new machine comes to the factory, the hook has to undergo a test. This includes typically checking its length and width. 

Fishing Hooks are more than just a piece of wire; the vast types tell how important they are. Fishing is as fantastic as the sport.

Steve Hudson

I have been an outdoor activities enthusiast from teenage. I have been going out with my parents on different outdoor activities such as camping and hiking. After moving to a town surrounded by three well known fishing spots, I started fishing and started using all kinds of tricks and equipment to make the most out of each adventure I pursued. Over the years I have been camping outdoor, hiking and following my passion of enjoying life at full. Few years ago, I started writing about my thoughts, experiments and ideas about outdoor, fishing, hiking and more. This blog is a compilation of that plus tips, ideas and products that can make life more meaningful, enjoyable and a pleasant.

Recent Content